Encore Anthracite Glue Cartridge 50ml

This Anthracite Encore glue cartridge has been specifically developed and designed to bond, join and edging the Encore Anthracite range of work-surfaces .

This glue gun applicator will be required to mix and dispense this two-part adhesive at the correct ratio. Each glue cartridge will join 1x worktop and 1x edging, or any combination of the two.

The Anthracite Encore glue cartridge is for joining and seaming Anthracite Encore 2.05m worktop, 4.1m worktop, 2.4m 900mm breakfast bar, 1.35m edging, 2.4m edging and 1.02m radius edging. This glue gun applicator will also be required along with installation and after care products for prepping, joining, sanding, and finishing.

Handy Hints and Tips: dry-fit all joints and edge trims to ensure seams will be as thin as possible and make adjustments where necessary. Ensure you have sufficient clamps for edge trims and all joints tightened snugly. When sanding joints and seams ensure entire surface is sanded to the same finish.

Encore products carry a ten year manufactures guarantee.